HDR10 is the HDR signal your games and films use; HDR400 is VESA's entry-level monitor rating. Here is what each one promises and when HDR is worth it.

HDR10 and HDR400 aren’t two grades of the same thing, so neither one “beats” the other. HDR10 is a video format: the 10-bit HDR signal that games, Blu-rays and streaming apps send to your screen. HDR400 (properly, VESA DisplayHDR 400) is a certification that measures how well a monitor actually shows HDR, with a minimum of 400 nits peak brightness. Most DisplayHDR 400 monitors accept HDR10, so the real question when you shop is how bright and how dark the panel can get, and HDR400 is the lowest rung on that ladder.

If a box only says “HDR10” or “HDR ready”, it tells you the monitor can read an HDR signal. It says nothing about whether the picture will look any better than standard dynamic range.

The confusion people run into when they compare these labels

“One monitor is HDR10 and DisplayHDR 400, the other is only DisplayHDR 400. Which is better?”

That was the starting point of a Microsoft Flight Simulator forum thread from July 2023 when the sim added HDR10 support. The replies barely mentioned the HDR10 label. They talked about peak brightness and black levels instead, and the poster ended up concluding that the True Black version of 400 (OLED-style blacks) makes a big difference. That matches how the standards work: HDR10 describes the signal, DisplayHDR describes the screen.

“Is 400 nits enough for HDR games?”

For bright, high-contrast scenes, players in that same thread said no. One reply explained that the sim’s highlights are mastered well above 400 nits, so a 400-nit panel either compresses them or blows them out, and several people pointed to DisplayHDR 1000 as the level where HDR starts to impress. Microsoft’s guidance is gentler but leans the same way: its HDR in Windows support page recommends DisplayHDR 500 or higher.

“I turned HDR on and everything looks washed out”

This is the most common complaint with entry-level HDR monitors. In an ElevenForum thread from February 2025, the fix that worked was turning on the HDR mode in the monitor’s own on-screen menu, then redoing the Windows HDR settings. Months later the same poster switched HDR off again because the blacks still looked grey. Dell’s support article says a dull desktop with HDR on is expected behaviour, not a fault, and suggests switching Windows HDR on only when you’re about to watch or play HDR content.

HDR10 vs HDR400 at a glance

Here’s how the two labels differ in what they promise. The HDR10 column follows the HDR10 Media Profile the Consumer Electronics Association set out in 2015 (Display Daily summary of the CEA definition); the DisplayHDR 400 column uses VESA’s current CTS 1.2 test criteria.

HDR10 DisplayHDR 400 (HDR400)
What it is A video format and signal standard A test and certification for monitors
Who defines it CEA (now CTA), announced August 2015 VESA
Brightness promise None for the display At least 400 nits on a small bright patch and in a full-screen flash, 320 nits held full-screen
Black level Not covered No higher than 0.4 nits in VESA’s corner-box test
Colour Signal uses BT.2020 colour primaries 99% of BT.709 and 90% of DCI-P3 coverage
Bit depth 10-bit signal Must accept a 10-bit signal; the panel can be 8-bit plus dithering
Brightness curve SMPTE ST 2084 (PQ) Tested against the same ST 2084 curve
Metadata Static: SMPTE ST 2086, MaxCLL, MaxFALL Not applicable
Where you see it TVs, monitors, consoles, games, streaming apps, discs Monitors and laptops only

The overlap is the useful part. VESA tests DisplayHDR monitors with a 10-bit signal on the ST 2084 curve, which is the same curve HDR10 is built on. So a certified DisplayHDR 400 monitor will normally show you HDR10 content from a PC or console; the badge then tells you the minimum quality you’ll see.

What does DisplayHDR 400 actually guarantee?

A modest step up from a good SDR monitor, and not much more. Under CTS 1.2, released by VESA on May 7, 2024, the 400 tier needs 400 nits peak, a black level no higher than 0.4 nits, and either 1D local dimming or a big jump in native contrast. No full-array local dimming is required, and that’s the feature that makes HDR highlights pop next to deep shadows.

The higher tiers show what 400 leaves out. All figures below are minimums from VESA’s performance criteria page:

Tier Peak brightness Full-screen, sustained Max black level DCI-P3 Dimming
DisplayHDR 400 400 nits 320 nits 0.4 nits 90% 1D dimming or higher native contrast
DisplayHDR 500 500 nits 320 nits 0.1 nits 95% 1D or better
DisplayHDR 600 600 nits 350 nits 0.1 nits 95% 1D or better
DisplayHDR 1000 1,000 nits 600 nits 0.05 nits 95% 2D or better
DisplayHDR 1400 1,400 nits 900 nits 0.02 nits 95% 2D or better
DisplayHDR True Black 400 400 nits 250 nits 0.0005 nits see VESA No dimming test (N/A)

Look at the black-level column. A True Black 400 screen is allowed only 0.0005 nits, 800 times darker than the plain 400 tier. That’s why an OLED monitor with “only” a 400 badge can look far better in HDR than an LCD with the same number.

One more catch: VESA says CTS 1.2 raised the colour requirements compared with the older 1.1 spec, so an older HDR400 monitor may have been certified against a lower bar. VESA’s certified products list shows the CTS version for each listed model, though it only includes products the manufacturer chose to make public.

Which should you look for when buying a monitor?

Look for both, then judge the monitor on the DisplayHDR tier. HDR10 support is the entry ticket; the tier tells you whether HDR will be worth switching on.

  • You mostly work, browse and play SDR games: an HDR400 monitor is fine, but buy it for its resolution, refresh rate and price. Treat HDR as a bonus you’ll probably leave off.
  • You want HDR in games and films on an LCD: aim for DisplayHDR 600 or 1000. Microsoft’s own advice is DisplayHDR 500 or higher, and the jump to 1000 brings 2D local dimming.
  • You’re looking at OLED: True Black 400 is the badge that matters. The peak number is the same as plain 400, but the black level is in a different league.
  • The listing says “HDR10” with no DisplayHDR tier: check the spec sheet for typical and peak brightness and for local dimming. A panel that can’t get much past 300 nits is HDR in name only.

Does Windows need HDR10 or HDR400?

Windows needs HDR10. Microsoft’s display requirements say an external monitor or TV must support HDR10 and connect over DisplayPort 1.4, HDMI 2.0 or newer, USB-C or Thunderbolt. Built-in laptop screens need at least 1080p and a recommended 300 nits. A DisplayHDR badge isn’t required, though Microsoft lists VESA DisplayHDR as one of the certifications worth looking for.

For protected HDR video, Microsoft also lists a graphics card with PlayReady hardware DRM, the latest WDDM graphics driver and 10-bit codecs such as HEVC, VP9 or AV1.

How to get a better HDR picture on an HDR400 monitor

  1. Turn on the HDR mode in the monitor’s own on-screen menu, if it has one. Some models ship with it off, which was the fix in the ElevenForum thread above.
  2. In Windows 11, go to Settings > System > Display and switch HDR on.
  3. Run Microsoft’s Windows HDR Calibration app from the Microsoft Store. Players in the flight sim thread recommended it for setting correct brightness limits.
  4. Check the certification Windows reports under Settings > System > Display > Advanced display.
  5. If the desktop still looks flat, switch Windows HDR off for everyday use and turn it on only for HDR games and films, as Dell suggests.

Frequently asked questions

Is HDR400 real HDR?

It’s certified HDR, but at the entry level. DisplayHDR 400 guarantees 400 nits peak and a 0.4-nit black level without full-array local dimming, so highlights look brighter than SDR but contrast stays close to a regular LCD.

Is HDR10 better than HDR400?

They measure different things, so one can’t be better. HDR10 is the format of the content; HDR400 is a minimum performance rating for the monitor showing it, and most HDR400 monitors play HDR10 content.

Is DisplayHDR True Black 400 better than DisplayHDR 400?

For contrast, yes. Both tiers require 400 nits peak, but True Black 400 allows a black level of only 0.0005 nits versus 0.4 nits, which is why OLED monitors carry it.

Does a DisplayHDR 400 monitor have a true 10-bit panel?

Not necessarily. VESA requires every DisplayHDR monitor to accept a 10-bit signal, but the panel driver may be 8-bit with 2 bits of dithering.

What does HDR10 mean on a monitor box?

It means the monitor accepts the HDR10 signal: 10-bit video using the ST 2084 brightness curve, BT.2020 colour and static metadata. It doesn’t promise any brightness level, so check for a DisplayHDR tier or the peak brightness spec.

Are older HDR400 monitors the same as new ones?

Not quite. VESA’s CTS 1.2 spec from May 2024 tightened colour and contrast tests compared with CTS 1.1, so check which CTS version a model was certified under on VESA’s list.

Sources

Featured image: Evan0512 / Wikimedia Commons. CC BY-SA 4.0 https://creativecommons.org/licenses/by-sa/4.0/

Fozia

Fozia is the writer at WIREDISCOVER, covering PlayStation, DualSense, Nintendo Switch, Android and everyday app problems. Every guide starts from official support documentation and the issues owners report in community forums, and is updated when platforms change.

View all posts